|There are many reasons why you might receive an error message when upgrading or installing Windows 10, but common errors can be fixed with a few steps that you can do on your own. Note: An upgrade takes your device from an older version of Windows, such as Windows 7 or Windows 8.1, to Windows 10.|
Before searching for a specific error code, try the tips listed in General fixes. If those don’t fix your upgrade or installation problem, check the table of error codes at the bottom of this article.
Here are some things you can try to fix upgrade and installation errors:
Remove external hardware
Run the Windows Update Troubleshooter
Uninstall non-Microsoft antivirus software
Uninstall nonessential software
Free up disk space
An error that begins with 0xC1900101 is usually a driver error. If you see any of these error codes, try the following steps first to fix the problem. If these steps don’t work, see Resolve Windows 10 upgrade errors for more detailed technical info.
0xC1900101 – 0x2000c0xC1900101 – 0x200170xC1900101 – 0x300180xC1900101 – 0x3000D0xC1900101 – 0x4000D0xC1900101 – 0x40017
Make sure that your device has enough space. Your device requires at least 16 GB of free space to upgrade a 32-bit OS, or 20 GB for a 64-bit OS.
Run Windows Update a few times. Download and install any available updates in Windows Update, including software updates, hardware updates, and some third-party drivers. Use the troubleshooter for Windows 10 to fix Windows Update errors.
Check third-party drivers and download any updates. You can find third-party drivers and installation instructions for any hardware you’ve added to your device on the manufacturer’s website.
Unplug extra hardware. Remove all external storage devices and drives, docks, and other hardware you might have plugged into your device that isn’t needed for basic functionality.
Check Device Manager for errors. Select the Start button, then in the search box on the taskbar, type device manager. Choose Device Manager from the results. In the window that pops up, look for any device with a yellow exclamation mark beside it (you may have to select each category to switch to the list of devices). Press and hold (or right-click) the device name and select either Update Driver Software or Uninstall to correct the errors.
Remove third-party security software. Make sure you know how to reinstall your programs and that any necessary product keys are on hand. Windows Defender will help protect your device in the meantime.
Repair hard-drive errors. Select the Start button, then in the search box on the taskbar, type command prompt. Choose Command Prompt from the list of results. In the window that pops up, type chkdsk/f C: and press the Enter key. Repairs automatically start on your hard drive, and you’ll be asked to restart your device.
Note: You must have administrator permissions on your device to do this.
Do a clean restart into Windows.
Restore and repair system files. Select the Start button, then in the search box on the taskbar, type command prompt. Choose Command Prompt from the list of results. In the window that pops up, type DISM.exe /Online /Cleanup-image /Restorehealth and press the Enter key.
Note: You must have administrator permissions on your device to do this.
Other Common Errors
The following table lists the most common upgrade and installation errors and some things you can try to fix them. If you continue having problems upgrading or installing Windows 10, contact Microsoft support.
Error What it means and how to fix it
0xc1900223 This indicates that there was a problem downloading and installing the selected update. Windows Update will try again later and there is nothing you need to do at this time.
0xC1900208 – 0x4000C This could indicate that an incompatible app installed on your PC is blocking the upgrade process from completing. Check to make sure that any incompatible apps are uninstalled and then try upgrading again.
0xC1900107 A cleanup operation from a previous installation attempt is still pending, and a system restart is required to continue the upgrade. Restart the device and run setup again. If restarting device does not resolve the issue, then use the Disk Cleanup utility and clean up the temporary files and the System files.
0x80073712 A file needed by Windows Update is likely damaged or missing.
Try repairing your system files:
Select the Start button and type command prompt in the search box on the taskbar.
Choose Command Prompt from the list of results.
In the window that appears, type DISM.exe /Online /Cleanup-image /Restorehealth and press the Enter key.
0xC1900200 – 0x20008 This may signify that your PC doesn’t meet the minimum requirements to download or install the upgrade to Windows 10.
0x800F0923 This might indicate that a driver or other software on your PC isn’t compatible with the upgrade to Windows 10.
0x80200056 This could mean that the upgrade process was interrupted because you accidentally restarted your PC or signed out of your PC.
Try upgrading again and make sure your PC is plugged in and stays turned on.
0x800F0922 This error might mean that your PC couldn’t connect to the Windows Update servers. If you’re using a VPN connection to connect to a work network, disconnect from the network and turn off the VPN software (if applicable) and try upgrading again.
The error could also mean there isn’t enough free space in the System Reserved partition. You might be able to fix this problem by using third-party software to increase the size of the System Reserved partition. Error: We couldn’t complete the updates. Undoing changes. Don’t turn off your computer. These are generic errors that might appear any time a Windows update fails. You’ll need to determine the specific error code to investigate how to best resolve this problem.
You can find the error code for the failed update by viewing your update history. Look for the update that wasn’t installed, note the error code, and then contact support.
Error: Failure configuring Windows Updates. Reverting changes. To view your update history in Windows 8.1:
Open Windows Update by swiping in from the right edge of the screen (or, if you’re using a mouse, pointing to the lower-right corner of the screen and moving the mouse pointer up), select Settings > Change PC settings > Update and recovery > View your update history.
To view your update history in Windows 7:
Select the Start Start button icon button. In the search box, type Update, and then, in the list of results, Select Windows Update > View update history. Error: The update isn’t applicable to your computer. This error might mean that your PC doesn’t have the required updates installed.
Check to make sure that all important updates are installed on your PC before you try upgrading.
0x80070070 – 0x500110x80070070 – 0x500120x80070070 – 0x60000 This likely indicates that your PC doesn’t have enough space available to install the upgrade.
Free some space on the drive and try again.
0x80300024 The specified disk operation is not supported by the target disk, partition, or volume.
Make sure your machine meets the minimum requirements to install Windows 10.
0x80070002 0x20009 The system cannot find the file specified.
If you have a disk or disks where you are not installing Windows 10 on, remove those disks.
0xC1900101 0x200170xC1900101 0x30017 A driver has caused a problem.
Disable or remove all 3rd party antivirus or antispyware from your system. Disconnect all peripheral devices that are connected to the system, except for the mouse, keyboard and display.
Contact your hardware vendor to obtain updated device drivers. 0x8007042B 0x4000D Windows Setup terminated unexpectedly due to another process running in the background.
When you start Windows by using a normal startup, several applications and services start automatically, and then run in the background. These programs include basic system processes, antivirus software, system utility applications, and other software that has been previously installed. These applications and services can cause interference when you attempt to upgrade to the latest version of Windows 10.To help you determine whether a background program is interfering with the upgrade, a “clean boot” may be needed.
0x800700B7 0x2000a Windows Setup terminated unexpectedly due to another process running in the background.
Uninstall any antivirus or antispyware software and run the update again.
Here at MSA Data Solutions we have continued to evolve, moving with the times and keeping pace with modern technology. We are happy to pass on this knowledge and experience to our customers and pride ourselves in our personal service and commitment to excellence.
So whatever info-tech issues you may have, MSA Data Solutions has the knowledge and expertise to help you overcome them….